Head Cabinet Based Pole
AW1545 LTH poles are ideally suited to highways applications and locations where access for servicing camera equipment is restricted, therefore meaning a lowering trolley head can make servicing an easy operation.
Features
- Available in heights up to 15 metres
- AW1545 poles provide a fully integrated solution enabling equipment to be mounted in the base of the pole, therefore saving the need for an additional equipment cabinet and the civils' work involved with this.
- Reduces installation costs and street furniture
- Available in a 2 part format for ease of shipping and installation
- Manual winch or dual drum winch with winding device options available
- Fixed arm trolley head as standard or drop down arm option (see LTH pole option features on page 48)
- Supplied with double doors and wooden backboards as standard to give large equipment mounting area
- Flush fitting doors and Altron locks for enhanced appearance and security
- Constructed in high tensile steel and hot dip galvanised after fabrication for durability and longevity.
- A wide range of standard accessories are available.
- For design and construction standards see page 91
Standard Pole
AW1502 LTH poles offer the same easy servicing option in restricted locations as the AW1545 LTH poles, except they do not have a built in equipment cabinet base.They are in keeping with standard lighting structures.
Features
- Available in heights up to 15 metres
- Manual winch or dual drum winch with winding device options available
- Fixed arm trolley head as standard or drop down arm option (see LTH pole option features on page 48)
- Flush fitting door and Altron lock for enhanced appearance and security
- Constructed in high tensile steel and hot dip galvanised after fabrication for durability and longevity
- A wide range of standard accessories are available
- For design and construction standards see page 91
We have developed a range of features for our Lowering Trolley Head poles, to make them easy, reliable and safe to use.These features mean that a pole with the relevant options included, can be operated by one man standing on the ground, without the need for steps , or the need to support heavy camera loads, when lowering the camera to the service position.This therefore is the safest and easiest to operate Lowering Trolley Head pole available today
Features
- Trackway Upgrade - Trackway keeps the trolley head running true, when lowering and raising even in very windy conditions.
- Uplatch with quick release - Altron's unique cam latch system locks the trolley head into the top canopy so that there is no movement or vibration in the trolley head when raised and means that the winch cables do not hold the trolley head in the raised position. The quick release up-latch mechanism is
quick and easy to use. - Dual Drum Winch and Drill Winding Device - The dual drum winch gives complete safety with a second 'safety' winch rope. The drill winding device uses the latest battery technology with a speed limiter and torque lock upgrade, specifically for this application to ensure safe, reliable operation.The Drill winding device is light and transferable, so one device can service many poles.This upgrade meets the requirements of ILE TR7
- The Drop Down Arm - enables camera servicing in the upright position at ground level without the need for steps. The arm takes the weight of the camera equipment so this is an easy, one man operation that is safe to carry out.
- Cable Management - Altron's unique system means that the camera feeder cables are marshalled inside the pole shaft when the trolley head is being lowered. There is no need for an additional loop of cable or for a lanyard to be held, whilst operating the pole, therefore a one man operation.
- Drill Winding Device Support Bracket - this can be incorporated for easy one hand operation and takes the weight of the drill winding device, so operating the pole could not be easier.
The now standard use of CCTV during major road works on Motorways and other major trunk roads where many Altron towers, columns and poles are used prompted the development of cast concrete blocks at the Altron Factory.
Altron have many years of experience in block casting with knowledge gained from our involvement in the telecommunications sector. Ensuring our customers get a product fit for purpose and long life.
We now cast blocks for all our standard products at our factory and can ship and place these usually using our own vehicles as required across Europe.
Please contact a member of the Altron sales team for detailed information on these products.
As ANPR cameras and other traffic monitoring has become ever more prevalent, Altron have introduced a range of products with retractable cantilever arms for traffic monitoring over carriageways. More recently in conjunction with TFL (Transport for London) larger heavy duty products with a low level capstan arrangement for bringing the arm in for camera servicing have been developed.
Altron's own product range is widely used in these applications with typical arm lengths of up to 7m are generally available in both our AW1545 Cabinet Based Pole and our AW1502 Lamp Standard Pole ranges.
As these are specialist products please contact our sales team who will be happy to advise and supply technical details.
Altron A10 trailer mounted columns are specifically designed for mounting CCTV cameras. Ideally suited for temporary and event CCTV systems these units can be towed behind a standard car, come complete with all necessary accessories and are completely road worthy.
Trailers are supplied with telescopic columns to give up to 10 meters height when extended and can be built with a range of options such as cabinets and storage areas.
All trailers are supplied with outriggers for stability when the trailer is in operational position along with an adjustable Jockey wheel and are fully braked.
Please contact our Sales Team who will be happy to discuss your
requirements.
Features
- Compact robust design
- Winch and cable are left completely secure and can be padlocked when
trailer is left unattended - Column can be padlocked in the vertical position
- Auto run, auto reversing brakes/coupling supplied as standard
- Heavy duty 6 ply tyres fitted
- Constructed in high tensile steel and hot dip galvanised after fabrication for
durability and longevity - A wide range of standard accessories are available
