Products Wall Mounted Brackets Dome Cameras WB2-900D

WB2-900D

Extended Wall Mounted CCTV Dome Camera Bracket
Stock item - Dependent on UDA stock, see 'Options' tab for sizes / types held

WB2-900-D

Altron Extended Wall Mounted Dome Brackets are versatile, supplied with bolt-on UDA's (Universal Dome Adaptors) to suit any dome make / model - Most common sizes are held in stock but can also be produced to suit any dome fitting type, or where something non-standard is required.

Please specify dome make & model number when ordering, or dome fitting size / type.

Features

  • Robust wall bracket providing rigid mount for dome cameras
  • Extended arm allows dome camera to be spaced away from wall by 900mm
  • Camera cabled either through wall into arm, or conduit entry is provided under arm for surface mounting cables
  • Supplied with UDA to suit dome make / model employed - Most common sizes held in stock
  • UDA benefits from being easily removed / replaced if dome is upgraded, without need for replacing entire bracket
  • UDA's can also be supplied with flat mounting plates, commonly for small, static / vandal domes, with or without junction boxes
  • Can be produced to suit any dome fitting type, or where something non-standard is required - non-stock UDA's made to order
  • Hot dipped galvanised finish

Download Datasheet

WB1D-900

 

Please specify dome make & model number when ordering, or dome fitting size / type - See 'Options' tab for sizes / types held

Construction and finish

  • Bracket - Produced in high tensile steel
  • Hot dip galvanised for longevity
  • Universal Dome Adaptor - Produced in Grade 304 Stainless Steel
  • Gasket Seal - 1mm Neoprene Rubber
  • Fixings - Stainless Steel Grade A2
  • Polyester powder coated finish to BS4800 - Option on request

Part Numbering

Standard WB2-900D held in stock has a 900mm outreach arm - Revised arm lengths are available up to 1200mm (made to order), please swap out '900' in part number with  the desired length :-

e.g. For a 800mm outreach arm - WB2-800D

e.g. For a 1200mm outreach arm - WB2-1200D

 

Stock UDA's

Please specify dome make & model number when ordering, or dome fitting size / type - Common sizes held below :-

  • 1 ½” NPT Female - Pelco, Hikvision, Avigilon, Dahua, Hanwha etc.
  • 1 ½” NPT Male - Bosch, Axis, Panasonic etc.
  • ¾” NPT Male - Illustra etc.
  • M35x1.5P Female - Bosch etc.
  • Ø47.5mm ID (Internal Diameter) - Hikvision etc.
  • 1” BSPP Female - Hikvision Pendant Cap etc.

Options

  • Longer outreach arms - For outreach arms up to 2m, we can supply modified versions of our AW1705 extended wall brackets, with the standard 101.6 PCD camera mount replaced with the UDA plate for dome mounting - see AW1705
  • Version of bracket to mount to cladded buildings - Please contact us for further details
  • Variations to suit bullet cameras - Please contact us for further details
  • Powder coated finish over galvanising - To BS / RAL colours on request
  • Brackets produced in grade 316 stainless steel - For an architectural finish