Products Pole & Tower - Camera Brackets Pole Mounting Brackets PMB (Ø*) SF

PMB (Ø*) SF

Pole Mounting Offset Fixed Camera Mounting Bracket

PMB-168-1000-SF

Features

  • Provides extended stand-off from pole
  • Robust fabricated steel construction
  • Hot dipped galvanised finish
  • Standard 101.6 PCD CCTV camera mount fixing holes
  • Fitted with PTS-1 knuckle as standard - HAS-1 knuckle fitted as option
  • PTS-1 and HAS-1 knuckles can be produced to suit any non standard camera housing (made to order)

Download Datasheet

PMB-168-1000-SF-PG80 tech

For extended offset brackets over 600mm, it is important than on tilt-down products, the arm is orientated in the direction of tilt.
  

Part Number Outreach Load Capacity Bracket
    PTS-1 HAS-1 Weight
PMB-(Ø*)-600/SF 600mm 10kgs 25kgs  9.75kgs
PMB-(Ø*)-1000/SF 1000mm 10kgs 25kgs  12kgs
PMB-(Ø*)-1200/SF 1200mm 10kgs 20kgs  13.25kgs
PMB-(Ø*)-1500/SF 1500mm 10kgs 15kgs  15kgs

 

Add (Ø*) pole diameter - e.g. for 168mm diameter pole with 1000mm outreach - PMB-168-1000/SF

All part numbers noted above are for brackets to fit tubular poles. For brackets to fit box section columns replace PMB prefix with CMB and state column section size - e.g. for a 120mm box section column with 600mm outreach - CMB-120-600/SF

PMB-CMB (1)

Construction and finish

  • Produced in high tensile steel
  • Hot dip galvanised for longevity
  • Knuckles in grade 304 stainless steel
  • Fixings are stainless steel grade A2
  • Powder coated finish to BS & RAL colours on request