Pole Mounting Offset PTZ Camera Mounting Bracket



  • Provides extended stand-off from pole
  • Robust fabricated steel construction
  • Hot dipped galvanised finish
  • Standard 101.6 PCD CCTV camera mount fixing hole
  • Can be produced to suit any camera type (made to order)

Download Datasheet

PMB-168-1000-SPT-PG80 tech

For extended offset brackets over 600mm, it is important than on tilt-down products, the arm is orientated in the direction of tilt.

Part Number Outreach Load Capacity Bracket Weight
PMB-(Ø*)-600/SPT 600mm 25kgs 11.5kgs
PMB-(Ø*)-1000/SPT 1000mm 25kgs 14kgs
PMB-(Ø*)-1200/SPT 1200mm 20kgs 15.75kgs
PMB-(Ø*)-1500/SPT 1500mm 15kgs 17.5kgs


Add (Ø*) pole diameter - e.g. for 219mm diameter pole with 1500mm outreach - PMB-219-1500/SPT

All part numbers noted above are for brackets to fit tubular poles. For brackets to fit box section columns replace PMB prefix with CMB and state column section size - e.g. for a 150mm box section column with 1000mm outreach - CMB-150-1000/SPT


Construction and finish

  • Produced in high tensile steel
  • Hot dip galvanised for longevity
  • Fixings are stainless steel grade A2
  • Powder coated finish to BS & RAL colours on request