Pole Top 2m Offset Arm PTZ Camera Mounting Bracket



  • Provides extended offset from top of pole or column to enable view not achievable when camera is mounted centrally
  • Robust fabricated steel construction
  • Hot dipped galvanised finish
  • Standard 101.6 PCD CCTV camera mount fixing holes
  • Can be produced to suit any camera type (made to order)

Download Datasheet

Bracket Weight - 32kgs

It is important that on tilt-down products, the arm is orientated in the direction of tilt.

POB1-168-2000--SPT-PG80 tech

Construction and finish

  • Produced in high tensile steel
  • Hot dip galvanised for longevity
  • Fixings in stainless steel grade A2
  • Powder coated finish to BS & RAL colours on request

Part numbering

Add (Ø*) pole diameter - e.g. for 219mm diameter pole - POB1-219-2000/SPT

The part number noted above is to fit tubular poles. For brackets to fit box section columns replace POB1 prefix with COB1 and state column section size - e.g. for a 150mm box section column - COB1-150-2000/SPT